Receiving Volume And Tone Settings - Geemarc CL210A Handbuch

SETTINGS

Receiving Volume and Tone Settings

You can alter the receiving volume and tone during a conversation
according to your hearing requirements.
Use the Volume slide control on the front edge of the telephone base to
adjust the level.
The button on the telephone base provides additional amplification
(up to 40dB). When the amplify function is activated, the red light on the
key is lit.
Setting a default for Amplification.
A switch located at the rear allows the amplification facility to be
switched ON or OFF as a default each time you use the telephone.
Switch at Position
The additional amplification and tone controls are automatically activated
each time you use the telephone. The LED light on the amplify will be lit.
Pressing the Amplify button during a call will turn off the additional
amplification and tone controls. However, you can still adjust the handset
receive volume with the Volume slide bar.
Irrespective of how many times you press the amplify key throughout a
call, the next time you pick up the handset to make a new call, these
functions will be activated once again.
9