Receiving A Call; Receiving A Call - Hands Free; Last Number Redial; R Button On Private Branch Exchanges - Geemarc CL210A Handbuch

USING THE TELEPHONE

Receiving a Call

To end the call simply replace the handset in the cradle.
Receiving a call – Hands Free

Last Number Redial

Lift the handset and press

R Button on Private Branch Exchanges

If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button.
Please refer to the operating manual supplied with your private branch
exchange to determine whether the telephone will work correctly with the
exchange.
Note
: You can select the flash time 100/300ms by using the flash switch
on the rear of the unit.

Headset Use

A headset can be connected at the rear side of the base in the 2.5mm jack
.
Press to get a dial tone.
Note
: When using the headset the call is not amplified
Lift the handset and speak.
Press to speak hands free,
To end the call, press
to redial the last number (up to 32 digits).
12