KERN CGB Betriebsanleitung Seite 50

Example 2:
Counting parts into a full container
Settings: (changes in factory settings required for this example)
Autotare when the [START] is key is pressed: Off (Code 3. 7. 1)
Step
1. Turn on balance, if power is off. [ON/OFF]
2. Place empty container
on balance and tare.
3. Place full container on balance [START]
and initialize counting.
4. Set reference sample quantity;
in this example, turn selector
to "20".
5. Remove selected quantity of
reference parts from
container.
6. Save reference piece count.
The balance now calculates
the number of parts and
displays the piece count.
7. Print piece count.
If you have selected
"nRef" and "wRef" in the menu,
these lines will be printed:
8. Unload balance
9. Repeat counting starting from step 6, if desired.
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
50
Press key
[TARE]
[OK]
[PRINT]
Display/Printout
0.0
g
NET
+ 267.3
g
NET
+ 267.3 SAMPLE
Brief display of:
ref 20
+ 249.1
g
NET
+ 249.1 SAMPLE
+ 274
pcs
NET
+ 249.1 + 0.9100
nRef + 20
wRef + 0.9100 g
Qnt + 274
N + 249.1
T + 50.0
G# + 299.1
0
pcs
NET
pcs
g
g
g