Technical Data - Unitest Testfix Bedienungsanleitung

Technical Data

7.0 Technical Data
TESTFIX 9023
Display:
acoustic (beep)
Optical (lamp)
Resistance Ranges:
Optical indication:
up to approx. 10 V
Acoustic Indication:
up to approx. 100 Ω
Test voltage:
4.5 V
Test current:
Opt. ind. app. 200 mA
Acoust. ind. app. 40 mA
Lighting:
If lamp does not work or is missing, no continuity
test can be performed!
Power supply:
The resistance ranges shown represent typical indi-
cations.
Individual values may vary from above indications,
due to temperature fluctuations or battery condi-
tion.
12 month warranty
UNITEST instruments are subject to strict quality
control. However, should the instrument function
improperly during normal use, you are protected by
our 12 month warranty (valid only with invoice or
receipt).
Within the warranty period we will decide whether
to exchange or repair the defective instrument. We
will repair free of charge any defects in workman-
ship of materials, provided the instrument is re-
turned unopened and untampered with.
Damages due to dropping or incorrect handling are
not covered by the warranty. If the instrument
breaks down following expiry of warranty our servi-
ce department can offer you a quick and economical
repair facility.
20
TESTFIX electronic 9026
Display:
acoustic (beep)
Optical (lamp und LED)
Resistance Ranges:
Range I:
approx. 0...500 Ω
(green LED)
Range II:
approx. 500 Ω...50 kΩ
(red LED)
Test voltage:
4.5 V
Test current:
approx. 50 µA
glow lamp 3.5 V/0.2 A E10
Battery 3 x 1.5 V IEC LR6
Subject to changes without notice!