R&S ESCI Bedienungsanleitung Seite 732

R&S ESCI
Gerät Befehl (Sheet 33 of 50)
R&S FSE [SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:
ESCI AUTO
FSE [SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:
MODE
R&S FSE [SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:
ESCI MODE:FFT
R&S FSE [SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:
ESCI RATio
R&S [SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:
ESCI TYPE
R&S [SENSe<1|2>:]BANDwidth|BWIDth:VIDeo:TYPE
ESCI
R&S FSE [SENSe<1|2>:]CORRection:COLLect[:ACQuire]
ESCI
FSE [SENSe<1|2>:]CORRection:CVL:BAND
FSE [SENSe<1|2>:]CORRection:CVL:BIAS
FSE [SENSe<1|2>:]CORRection:CVL:CATalog?
FSE [SENSe<1|2>:]CORRection:CVL:CLEar
FSE [SENSe<1|2>:]CORRection:CVL:COMMent
FSE [SENSe<1|2>:]CORRection:CVL:DATA
FSE [SENSe<1|2>:]CORRection:CVL:MIXer
FSE [SENSe<1|2>:]CORRection:CVL:PORTs
FSE [SENSe<1|2>:]CORRection:CVL:SELect
FSE [SENSe<1|2>:]CORRection:CVL:SNUMber
6.330
Unterschiede R&S FSP/R&S FSE-Familie
Parameter Hinweise
ON | OFF
ANALog | DIGital not available for
R&S ESCI and
R&S FSET
ON | OFF old command that is still
supported, but has been
replaced on the
R&S ESCI by
[SENSe<1|2>:
]BANDwidth|BWIDth[:
RESolution]:TYPE
0.0001 to 1
NORMal | FFT | CFILter | new function for
RRC R&S ESCI
LINear | LOGarithmic new function for
R&S ESCI
THRough | OPEN
A|Q|U|V|E|W|F|D|G|Y|J not available for
R&S ESCI and
R&S FSET
<numeric_value> not available for
R&S ESCI and
R&S FSET
not available for
R&S ESCI and
R&S FSET
not available for
R&S ESCI and
R&S FSET
<string> not available for
R&S ESCI and
R&S FSET
<freq>,<level> to not available for
R&S ESCI and
R&S FSET
<string> not available for
R&S ESCI and
R&S FSET
2 | 3 not available for
R&S ESCI and
R&S FSET
<file_name> not available for
R&S ESCI and
R&S FSET
<string> not available for
R&S ESCI and
R&S FSET
Operating Manual 1166.6256.11 - 02