Safety Instructions - Conrad iDC9602A RIOTEC Bedienungsanleitung

Operating instructions
iDC9602A RIOTEC Wireless pocket scan 1D laser
barcode scanner
Item no. 1426915
Intended use
Use the barcode scanner for quick and reliable scanning of conventional barcodes, such as UPC or EAN
barcodes. The built-in battery provides enough power for at least 25,000 scans (after a full charge). The
barcode scanner has a wireless range of 100 m, making it ideal for on-the-go use in shops, warehouses or
offices. Data is transmitted via Bluetooth Class 1. The scanner has a 1 MB internal memory, which can store
up to 65,000 EAN 13 barcodes and send them to Bluetooth
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
®
Delivery content
• Barcode scanner
• Mini-USB charging cable
• Quick start guide
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code above.
Follow the instructions on the website.

Safety instructions

Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• Risk of injury! Do not point the product at people or animals.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Rechargeable batteries
• The rechargeable battery is permanently built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the
rechargeable battery technology being used, you do not need to discharge the rechargeable
battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a
certain amount of heat is generated during charging.
c) Laser
• When operating the laser equipment, always make sure that the laser beam is directed so that
no one is in the projection area and that unintentionally reflected beams (e.g., from reflective
objects) cannot be directed into areas where people are present.
-capable mobile devices.
®
• Laser radiation can be dangerous, if the laser beam or its reflection enters unprotected eyes.
Therefore, before using the laser equipment, familiarise yourself with the statutory regulations
and instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser radiation can
seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your head away
from the beam.
• If your eyes have been irritated by laser radiation, do not continue to carry out tasks with
safety implications, such as working with machines, working from great heights or close to
high voltage. Also, do not operate any vehicles until the irritation has completely subsided.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected
beam may strike people or animals.
• Never open the device. Setting or maintenance tasks must only be executed by a trained
specialist familiar with potential hazards. Improperly executed adjustments might result in
dangerous laser radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages are included
in the package. If the sign on the laser is not written in the language of your country, please
affix the appropriate sign onto the laser.
• Caution: if operation settings or procedures other than those described in these instructions
are used, it could lead to exposure to dangerous radiation.
Operating elements
6
5
4
3
2
1
Charging the barcode scanner
The battery must be charged before using the product for the first time.
When there is insufficient battery power remaining, the LED indicator (2) flashes orange and you will hear a
beep. When the indicator flashes, charge the battery straight away. If the product has turned itself off, fully
charge the battery before turning it on with the trigger (4). To charge the battery, follow the steps below:
• Pull the cap out of the mini USB port (8).
• Insert the mini USB plug on the USB cable into the mini USB port on the scanner.
• Connect the USB-A connector on the mini USB cable to a USB port on a computer or another suitable USB
power source, such as a USB power adapter.
• The battery level indicator (2) flashes to indicate that the internal battery is charging. Depending on the
remaining battery level, a full charge takes 4-5 hours.
If you previously pressed the power saving button (3) (i.e. the device is in power saving mode),
the LED indicator will not turn on during charging.
• The LED indicator will flash orange when the battery is fully charged.
• Remove the product from the USB power source when the LED indicates that the battery is fully charged.
The device is now fully charged and ready for use.
• Insert the cap back into the mini USB port.
The barcode scanner does not automatically enter sleep mode when the battery is charging.
Pairing the barcode scanner with your mobile device via Bluetooth
Your mobile device must support at least one of the following Bluetooth
or Bluetooth SPP.
®
Configuring the Bluetooth connection
®
Ensure that your mobile device and the installed software supports the HID or SPP Bluetooth
Enable Bluetooth on your mobile device. For more information, refer to the instructions for your mobile
®
device. Follow the onscreen instructions to your pair your mobile device with the scanner. The LED
indicator (2) turns red to indicate that the scanner is in pairing mode. It turns off when the two devices have
been paired successfully. The barcode scanner is now ready to use and can read barcodes and transmit
data via the Bluetooth connection.
®
• Press and hold the trigger (4) for 8 seconds to turn on the barcode scanner.
• To access the Bluetooth settings, select Main>Setup>BTsetup and confirm your selection with ENTER
®
(trigger (4)).
• Select the type of device that you wish to connect: SPP device>HID device>dongle and confirm your
selection with ENTER. "Setting ... Completed!!!!" will be displayed. You can also use the configuration
codes in the quick start guide included with this product. Always start by using the HID profile.
• If you are setting up the Bluetooth connection via a dongle, you will need to enter the dongle's MAC
®
address. You can do this by scanning the MAC address barcode on the dongle housing. Select SCAN
(trigger (4)) to confirm and then scan the barcode. This completes the Bluetooth
"Off line !!!" will be displayed if the Bluetooth
uploaded. The device will attempt to re-establish the connection. "...Linking!" will be displayed.
Bring the barcode scanner within range of your computer or mobile device. If necessary, repeat
the pairing process.
1 Clip (for attaching the wrist strap)
2 LED indicator
3 Power saving button
7
4 Trigger
5 Onscreen keyboard button (displays the
keyboard on the screen, only works with iOS
devices)
6 Scan window
7 Reset button (recessed)
8 Mini-USB port
8
profiles: Bluetooth
®
setup.
®
connection is interrupted when data is being
®
®
HID
®
profiles.
®