AIPTEK dv t200 Handbuch Seite 35

Installing the driver to your PC (continued)
3
Install the driver.
The Install Shield Wizard will then appear
and automatically install the program.
Click on Next and follow the on-screen
instructions to complete the installation.
4
Install codecs.
After the driver installation is
completed, the program will
prompt you to install Windows
Media Player Codecs. If you
are not sure whether the codecs
have been installed in your
computer, please click on Yes and follow the on-screen instructions to
complete the installation.
5
Install Direct X 9.0c or above.
After the codecs installation is completed, you will be prompted to install
Direct X 9.0c or above if the program is not yet installed in your computer.
Please click on Yes to continue.
Windows Media Player Codecs and Direct X 9.0c or above are
necessary for viewing the video clips recorded by the camera.
6
Restart the computer.
After the installation is completed, you may need to restart your computer
for the driver to take effect.
33