Menu Items - AIPTEK 3D-iS2 Handbuch

Menu items

Item Option
3MP
Resolution 5MP
12MP
Flash
Auto
Strobe
Auto
Night Shot
EV -2 ~ +2
Auto
Sunny
Cloudy
White
Balance
Fluorescent
Tungsten
Selftimer
Continuous
Shot
Language
languages
Clock
Date Stamp
Slide Show
Picture
Beep
50Hz
Frequency
60Hz
Description
3 mega-pixels
5 mega-pixels
12 mega-pixels
Off The flash is disabled.
The flash enables when ambient light is insufficient.
On The flash is forced on in every shot.
Turn on the
Off Turn off the
Manually adjust the exposure to gain better effect when the
preview image appears too bright or too dark. A positive
value indicates the image will be brighter than usual; while a
negative value makes the image dimmer.
The camera adjusts white balance automatically.
This setting is suitable for outdoor recording in sunny
weather.
This setting is suitable for recording in cloudy weather or
shady environments.
This setting is suitable for indoor recording with fluorescent
lamp lighting, or environments with high color temperature.
This setting is suitable for indoor recording with
incandescent lamp lighting, or environments with low color
temperature.
Off
Disable the self-timer function.
On Enable the self-timer function.
Off Take 1 picture at a time (default).
3 Take 3 pictures in a roll.
5 Take 5 pictures in a roll.
16
Select the language for the camera.
To setup the date and time, push the Joystick up/down (
to adjust value; left/right (
save the changes.
On Print a date and time mark on each photo (photo only).
Off Turn off the Date Stamp function.
Off Turn off the Slide Show function in playback mode.
All Turn on the Slide Show function in playback mode.
Only photos will demonstrate the Slide Show in playback
mode.
On Turn on the system sound.
Off Turn off the system sound.
Set flicker frequency to 50Hz or 60Hz. See the "Flicker
table" for more details.
night shot.
night shot.
(10 Sec)
) to shift fields. Press
7
)
OK to