Herunterladen Diese Seite drucken

Hama 55315 Bedienungsanleitung Seite 15

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Reset Settings
Brightness/Contrast
Color/Tint
TV Connection:
1.
Power on the digital photo frame.
2.
Use the enclosed Video out cable to connect the digital photo frame to your TV.
3.
Press „TV" button on the remote control to enter NTSC mode.
If your TV is PAL system then press „TV" button one more time to switch to PAL mode.
4.
If you want to terminate TV out function then press „TV" button 3rd time to return to digital photo frame.
PC/Mac Connection:
1.
Power on the digital photo frame.
2.
Use the enclosed USB cable to connect the digital photo frame to your PC or Mac. The digital photo frame
becomes a multi card reader for fi les transferring.
Mounting the Digital Photo Frame:
Two mounting holes on the back of digital photo frame can be used to mount your digital photo frame. When wall
mounted, make sure the mounting hole aim at the screw then mount the digital photo frame directly and slightly.
Trouble Shooting
SYMPTOM
Digital Frame doesn't
power on
Digital Frame doesn't power on by the
remote control
Insert memory card and thumbnail photos
do not show up.
TV-OUT doesn't work
Some pictures load
fast than others
Product Specifi cations:
LCD Display:
• 8" TFT LCD
• Display contents: 800 pixels x 600 pixels
• Dot pitch: 0.0675(W) x 0.2025(H) mm
• Aspect Ratio: 4:3
14
00055315bda.indd Abs3:14
00055315bda.indd Abs3:14
Restore settings to default values
keys adjust Brightness
keys adjust Contrast
keys adjust Tilt
keys adjust Color
CAUSE and/or CORRECTIVE ACTION
The power adapter is not connected to the digital frame
or electrical outlet properly. Check the power adapter
connection again to make sure no problem.
Make sure the power switch on the left side of digital
frame is pressed to the „ON" position.
No picture fi les are stored in the memory card.The
picture fi les are incompatible fi le format.Compatible
picture format: JPEG, Compatible video format:
MOTION JPEG (avi)
Check if the NTSC or PAL setting is correct.
Higher resolution pictures load slower. Using a lower
resolution when taking pictures will speed up
loading time.
17.12.2007 13:32:06 Uhr
17.12.2007 13:32:06 Uhr

Werbung

loading