Base Installation; Operation; Insert Memory Card - AIPTEK Monet Deluxe Anleitung

Monet Deluxe Quick Start Guide

Base Installation

Put the base, as shown in the picture, in front of
the picture frame and turn it into clockwise direction
until it locks into place. For removing the base,
please turn it in counter-clockwise direction and
remove it from the device.

Operation

Before you can use the picture frame, it has to be
connected to the power supply. Plug the connection
cable of the power adapter into the respective plug
of the picture frame and plug the power adapter
into a wall outlet.
Turn on the picture frame by turning the switch on the
back side into the ON Position. The green indicator
light will light up and the device will show the Welcome
screen. Some moments later, the automatic slide show
of some pictures that we put into the internal memory
will start.
To turn off the picture frame, turn the switch into the
OFF position. The indicator light will turn off.

Insert memory card

Push the memory card (not included) gently
into the respective card slot until it stops.
When inserting a SD/MMC card, make sure
that the contacts show to the back. CF cards
should be inserted with the front side showing
to the back. For the connection of an USB
stick, please use the supplied adapter cable
and connect it to the device and the USB stick
as shown.
www.aiptek.eu Page 7
ON
OFF