Audio Settings - Peaq PBR210 Bedienungsanleitung

53

Audio settings

To access the audio settings press AUDIO
SETUP on the remote control. Audio setup
settings are shown on the panel of the
appliance. Select the desired setting with the
and buttons. Press ENTER to confirm.
The follwing settings can be made:
LEVEL: The volume for each speaker can
be adjusted individually. Select the desired
speaker with the and
FL Front left
FR Front right
SW Subwoofer
The volume can be adjusted with the
buttons in a range from -10 to +10. Press
ENTER to confirm.
HDMI AUDIO OUT: The audio output for
the HDMI output can be set ON or OFF.
With this setting you can select if sound is
transfered via the HDMI connection.
TONE: Bass and treble can be adjusted
individually. The function can be selected
with the and buttons. Adjust it with the
and buttons in a range from -6 to +6.
buttons:
and
ENGLISH