Basic Functions - Peaq PBR210 Bedienungsanleitung

41

Basic functions

SENSOR BUTTONS
Sensor buttons for basic functions can be
found on the panel of the appliance. Touch
them gently to operate them.
STANDBY/ON
Press on the main unit or remote control
to turn on the unit. The power indicator turns
white. Press again to return to standby
mode. The power indicator changes to red
again.
EJECT
To open or close the disc tray, press the
OPEN/CLOSE button.
MUTE
To switch off the volume temporarely, press
button. The display will show MUTE ON.
Press button again to resume at preset
volume.
VOLUME
Press the VOL + button to increase volume.
Press the VOL - button to decrease
volume.
The volume can be set between 0 and 40.
The current setting is shown on the display.
SELECT SOURCE
Press the SRC button on the panel to cycle
through the sources as follows:
DISC (BD/DVD/CD/USB), RADIO, AUX IN
1, AUX IN 2
Or press the respective buttons on the
remote control for direct access:
AV SOURCE - DISC/USB
RADIO - FM RADIO
AUDIO SOURCE - AUX IN 1, AUX IN 2
ENGLISH