Specifications - Peaq PBR210 Bedienungsanleitung

61

Specifications

VF Signal system
Video output
Component video
(Y, CB, CR)
Audio output
Audio performance
HDMI output
FM tuning section
Amplifier
USB output
Rated input
Power consumption
Dimensions (W x H x D)
Weight
Operating temperature
Operating humidity
USB devices with extension cables are not supported.
NTSC/PAL
Electric level output: 1.0 Vp--p, Resistance: 75 Ω
Output connector: Pin jack (1 system)
Y output level: 1.0 Vp-p
PB output level: 0.7 Vp-p
PR output level: 0.7 Vp-p
Output level: 2 Vrms (1 kHz, 0 dB)
Numer of Connectors: 2 channel: 1 system
Linear audio: 20Hz~20kHz
S/N ratio: 90 dB
Dynamic range: 80 dB
Total harmonic distortion: 0.004%
Output format: 480i/480p/576i/576p/720p/1080i/1080p
Frequency range: 87.5 MHz ~ 108 MHz
Sensitivity: <20 dBu
Signal-to-noise ratio: >60 dB
Antenna connector: 75 Ohms, unbalanced
Total power output: 200 W RMS
Frequency response: 40 Hz - 20 KHz
Signal-to-noise ratio: >60 dB (A-weighted)
Input sensitivity: AUX IN 1&2: 500 mV
5 V 500 mA
230V~ 50Hz
250 W
430 x 74 x 375 mm
5.6 kg
5°C - 35°C
10% - 80%
ENGLISH
Resistance: 75 Ω
Resistance: 75 Ω
Resistance: 75 Ω