Toshiba SHX10 Bedienungsanleitung Seite 6

General Guide
Connecting to a Standard Video Device
You can use the projector to project an image from a video deck, TV, video camera, or other video device.
Important! Important! Important!
Always turn off the projector and the video device before connecting them.
<Projector>
AV terminal
You can use the bundled special AV cable to connect to a pin jack (RCA) type VIDEO output terminal.
When connecting a video camera or other video device with a special video output terminal, use the
special cable that comes with the video device. For details, see the documentation that comes with the
video device.
NOTE
For details about the following types of connections, see the User's Guide on the CD-ROM that comes
with the projector.
Projector and component video output of video device
Projector and HDMI output of video device or computer
Turning On the Projector
Before performing any of the operations in this section, make sure you first set up the projector and
connect to an output device.
AC Power Cord Precautions
Use the AC power cord that comes with the projector.
Make sure that you use a power source with the same voltage as that specified for the projector.
Do not share the outlet supplying power to the projector with other devices. If you are using an
extension cord, make sure that the ampere rating of the extension cord is compatible with the power
consumption value of this projector.
Never use the power cord while it is still bundled together.
Never place objects on top of the power cord and do not step on it.
Never pull on the power cord. When unplugging it, grasp the plug.
Use a conveniently located power outlet that you can reach easily when you need to unplug the
projector.
To VIDEO output terminal
Bundled special AV cable
EN-5
<Video device>
To AUDIO output terminals
Red
Yellow
White