Enabling The Alarm - Silvercrest SWDR 500 A1 - IAN 273518 Bedienungsanleitung

 Press the "VOL-" (12) or "VOL+" (4) buttons to set the desired hour of the
alarm time. You can keep the buttons pressed to accelerate the digits count.
Press the "M-/AL1" button (14) briefly to apply the setting. The minutes flash
on the display (6).
 Press the "VOL-" (12) or "VOL+" (4) buttons to set the desired minutes of the
alarm time. You can keep the buttons pressed to accelerate the digits count.
Press the "M-/AL1" button (14) briefly to apply the setting.
 Now you can press the "VOL-" (12) or "VOL+" (4) button to select if you
want to wake-up with the buzzer ("bUZZ") or the radio ("rdA"). Press the "M-
/AL1" button (14) to confirm your selection.
 Now you can press the "VOL-" (12) or "VOL+" (4) buttons to set the desired
alarm volume. Press the "M-/AL1" button (14) briefly to apply the setting.
 Finally you can select the days of the week for which you want enable the
set alarm. Press the "VOL-" (12) and "VOL +" (4) buttons to toggle between
the following options:
Individual days of the week
Days of the week from Monday to Friday
Weekend Saturday and Sunday
All days of the week
Press the "M-/AL1" button (14) briefly to apply the setting.
You have finished setting the alarm time.

Enabling the alarm

In the following we describe the setting for AL1. You can program AL2 in the
same way.
SilverCrest SWDR 500 A1
English - 75