Naming The Preset Stations; Organizing The Preset Stations - Sony st s 3000 Bedienungsanleitung

Advanced Tuner Operations

Naming the Preset Stations

You can assign a name up to 5 characters long to each
preset station (except FM RDS stations). When the
station is tuned in, the station name will appear instead
of the frequency.
CHARACTER
DISPLAY
1
Use SHIFT and the TUNING/SELECT +or –
buttons to specify the preset where you want to
store the station name.
2
Press CHARACTER.
The cursor blinks in the display.
3
Press TUNING/SELECT + or – repeatedly to
select a character.
4
When the character you want appears, press
CHARACTER to move the cursor into position for
the next character.
If you make a mistake
Press CHARACTER repeatedly until the character you
want to change flashes (every time you press
CHARACTER, the next character flashes). Then press
TUNING/SELECT + or – to select a new character.
5
Repeat steps 2 and 3 until the station name you
desire appears in the display.
6
Press MEMORY.
"MEMORY" appears.
Note
The display returns to normal display mode if you do
not press ENTER within 8 seconds after pressing
MEMORY. If this happens, start again from the
beginning.
7
Press ENTER to store the station name.
To see the frequency of the displayed station name
Press DISPLAY repeatedly.
12 GB
MEMORY TUNING/SELECT
ENTER SHIFT

Organizing the Preset Stations

This tuner makes it easy to arrange preset stations in
the order you prefer. You can arrange all the preset
stations automatically, according to alphabetical order,
signal strength, country code, or tuner band, or you
can use the "Move" and "Erase" functions to move and
erase specific preset stations.
MENU
1
Press MENU.
2
Press TUNING/SELECT + or – repeatedly until
"Edit" appears in the display, then press ENTER.
If no stations have been stored as presets, "No
Preset" appears in the display.
3
Press TUNING/SELECT +/– repeatedly to
choose one of the following sorting methods:
Choose To
Move change the location of a specific preset.
Erase erase a specific preset.
Alphabet sort preset stations in alphabetical order
according to their preset names.
Stations without preset names are arranged
by frequency, from low to high.
Strength sort preset stations in order of their signal
strength (FM stations only).
MW and LW frequencies are arranged by
frequency.
Country sort FM RDS stations with PI information
alphabetically by country.
Other stations are arranged by frequency.
Band sort preset stations in order of their
frequency band (FM - MW - LW).
4
Press ENTER.
The tuner sorts the stations, then returns to
normal tuning mode and receives preset station
A1 unless you choose "Move" or "Erase".
Note
Some countries use the same country code, and the stations
from these counties may be arranged together.
ENTER TUNING/SELECT