Controls - Grundig Sonoclock 13 Bedienungsanleitung

Function Selection Switch ALARM/RADIO:
= alarm sounds at preset time
= radio comes on at alarm time
= radio off (no alarm function)
y
0
= radio on
TIME – used with HOUR/MIN to set the
clock time
ALARM – press briefly to display the
present alarm time
– to switch off the alarm tone (or
radio) when alarm function is
activated
– used with HOUR/MIN to set the
alarm time
SLEEP – to switch on the radio for max.1
hour and 59 minutes
SNOOZE – to interrupt radio or buzzer alarm
for approximately 9 minutes
– to switch off the radio before the
preset 'sleep' time has elapsed
HOUR – for setting the hours (clock time,
alarm time and 'sleep' time).
MIN – for setting the minutes (clock time,
alarm time and 'sleep' time).
VOLUME – to adjust the volume
BAND · – to select between FM and MW
FM MW
(Sonoclock 13)
· – to select between FM and LW
FM LW
(Sonoclock 13 L)
TUNING – to tune to radio stations
ALARM 6 – indicates that the alarm function
is activated

CONTROLS

TIME
. . . .
y 0
RADIO
ALARM
ALARM 6
Back of the set:
– AC mains cable
– Wire antenna for FM reception
SLEEP
SNOOZE
ALARM
HOUR
Battery
Base of the set:
Battery – back-up battery compartment
MIN
VOLUME
BAND
TUNING
GB
7