AEG FU 4002 P Bedienungsanleitung Seite 55

NOTE:
• You can make the unit search again for a station signal at any time. To do so, press
the RCC button (6), the " " symbol starts to flash again. You can also deactivate the
automatic search with the RCC button. To do so, keep the RCC button pressed until
the " " symbol is no longer displayed.
• The signal can be received without problems within a radius of ca. 2000 km around
Frankfurt / Main, but interference may occur, depending on local conditions. This
may occur especially in buildings containing a high percentage of metal, as well as in
proximity to TV sets, PCs, mobile phones etc. which are switched on! If the reception
cannot be automatically adjusted after 10 minutes in spite of the alignment of the
integrated antenna, the reception in the respective location is too weak. In this case,
set the time manually or change location.
Manual
The time cannot be set manually whilst the unit is searching for a radio signal.
• Hold the MODE button (9) pressed until the year indication (YR) on the display flashes.
• Using the UP (8) und DOWN (7) buttons, you can now set the year (YR), month (MONTH),
day (DATE), the language for the weekday (DAY), time zone (ZONE), hours and min-
utes in turn. For the weekday language you can choose from the following languages:
GE = German, EN = English, IT = Italian, FR = French, NE = Dutch, SP = Spanish,
DE = Danish.
• In each case, confirm the input with the MODE button. The current indication to be set
flashes on the display.
NOTE:
• The input is stored automatically within approximately 30 seconds when no button is
pressed.
• Setting of the weekday is done automatically.
Change time display format
Press the UP button (8) to switch between 12 hour and 24 hour display.
NOTE:
If 12 hour is selected, the following will appear: AM = morning, PM = afternoon
English
55