Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
4
5
18
User manual // Strobe Wizard Plus / freemask transmitter
Scope of delivery
The radio transmitter (Code No. 3950 or resp. 3955), as
well as the set of radio transmitter and receiver (Code No.
3952), comes with a synchronization cable with 2.5 mm
synchronization plug.
Proper use - improper use
The Hensel Strobe Wizard Plus Radio Transmitter is used
for triggering flashes, adjusting the flash power and
switching the modeling lamp between FULL/OFF/PROP in
Hensel flash units with built-in receiver (Porty Lithium,
Porty Premium (Plus), Nova D, Tria 24 SF and Pro Mini
AS power packs, Expert D, Integra Plus, Speed Max and
Plus versions of the Expert Pro and Integra Pro series) via
radio signal.
For all other flash units not fitted with a built-in receiver
Hensel-Visit International offers the usage of an external
receiver as accessory. In connection with the radio
transmitter flashes can be triggered, but additional
features like flash power adjustment and changing
modeling
light
available.
Every use of the equipment that differs from its prescribed
use is prohibited. In particular, controlling of electronical
items or machines other than described above is pro-
hibited.
Safety instructions
Changing this unit is strictly prohibited. The housing is
splash-proof but not watertight. Therefore protect the
equipment from humidity. The operation during rain is not
recommended because over the years, moisture might
ingress into the housing causing damage to the electro-
nics.
options
(FULL/OFF/PROP)
HENSEL-VISIT International GmbH
are
not
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
