Reloop JOCKEY IIIMaster Edition Bedienungsanleitung Seite 46

Element
T31
T32
T33
T34
T35
T36
T37
T38
T39
T40
T41
T42
T43
T44
F48
46
Funktion
Gain Dial
With this dial it is possible to adjust the deck's
volume.
EQ Dial High
Via this dial the high frequencies can be adjus-
ted.
EQ Dial Mid
Via this dial the middle frequencies can be
adjusted.
EQ Dial Low
Via this dial the low frequencies can be adjus-
ted.
Cue Monitor
Via this button it is possible to monitor the
selected deck.
Linefader
Via the linefader the channel's volume can be
adjusted.
Master Volume
Via this dial the master volume can be adjus-
ted.
This dial is analog and does not send a MIDI
signal.
Booth Volume
Via this dial the booth output volume can be
adjusted.
This dial is analog and does not send a MIDI
signal.
Headphones Volume
Via this dial the headphones' volume can be
adjusted.
This dial is analog and does not send a MIDI
signal.
Cue Mix Fading
Via the Cue Mix dial a pre-mix can be simula-
ted via the headphones. In right position the
master signal is audible, in left position the cue
signal is audible.
Power LED
The Power LED shows that the Jockey 3 dispo-
ses of a sufficient power supply.
MIDI Status LED
The MIDI Status LED shows that MIDI com-
mands are being sent by the controller.
VU Meter
The VU Meter shows the selected decks' input
level.
Crossfader
Via this fader it is possible to fade between the
decks. Please also see -T21-.
Crossfader Curve
Herewith it is possible to adjust the
crossfader's curve. Long > Cut.
Funktion bei aktivem Shift -T3-
Preview Player Buttons
Via these buttons the selected
track will be assigned to the
Preview Player and the track will
start and stop respectively.