Specifications - Yamaha NS-C325 Bedienungsanleitung

When using a banana plug
Banana plug
2
1
Remove the cover by pulling it toward you.
2
Tighten the terminal knob.
3
Simply insert the banana plug into the terminal.
The front cover is fastened to the enclosure at four points
and can be removed if desired. To remove the cover, hold
on to both sides and slowly pull straight away from the
speaker. To reattach, line up the four holes on the inner
3
surface of the cover with the four corresponding pegs on
the speaker and push gently.
1
Note:
When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive
force with tools.
Type .............. 2-way acoustic suspension speaker system
Driver ...................................... 10 cm (4") cone woofer x 2
Impedance ................................................................... 6 Ω
Frequency Response ................... 60 Hz to 50 kHz (-10dB)
Nominal Input Power ................................................... 50W
Maximum Input Power ............................................. 200 W
Sensitivity .................................................. 88 dB/2.83 V/m
Crossover Frequency ............................................. 2.5 kHz
Dimensions (WxHxD) ......................... 430 x 140 x 200 mm
Weight ................................................ 5.4kg (11 lbs.14 oz.)
● Specifications subject to change without notice due to
product improvements.
● Care should be taken not to exceed the input power
values noted above.
REMOVING THE FRONT COVER

SPECIFICATIONS

(16-15/16" x 5-1/2" x 7-7/8")
Magnetic shielding type
3 cm (1") dome tweeter
3
E-