Marshall Woburn Handbuch Seite 23

POWERSAVER & STANDARD
001. POWERSAVER STANDBY MODE: THE WOBURN WILL GO TO POWER
SAVING STANDBY MODE AFTER 20 MINUTES OF NOT RECEIVING A
SOUND SIGNAL. IF YOU HAVE CHOSEN TO USE THE POWERSAVER
STANDBY MODE, THE WOBURN WILL NOT WAKE UP AUTOMATICALLY
WHEN YOU BEGIN PLAYING MUSIC AND WILL NOT SHOW UP AS AN
AVAILABLE DEVICE IN YOUR BLUETOOTH LIST AFTER IT HAS GONE
INTO THIS LOW-POWER STATE. TO ACTIVATE WOBURN AND PLAY
MUSIC FROM ANY SOURCE AFTER THE UNIT HAS GONE TO STANDBY
MODE, PRESS THE WAKE BUTTON ONCE. THIS WILL BRING THE
WOBURN BACK TO LIFE AND READY TO PLAY AGAIN.
002. STANDARD STANDBY MODE: THE WOBURN WILL GO INTO STANDBY
MODE AFTER 20 MINUTES OF NOT RECEIVING A SOUND SIGNAL.
IF YOU HAVE CHOSEN TO USE THE STANDARD STANDBY MODE, THE
WOBURN WILL AUTOMATICALLY 'WAKE UP' WHEN THE LAST
SOURCE IS PLAYED. FOR EXAMPLE, IF A SOURCE CONNECTED WITH
A CABLE BEGINS TO PLAY, THE SPEAKER WAKES UP AUTOMATICALLY
WHEN THAT SOURCE IS SELECTED. IF A BLUETOOTH DEVICE WAS
USED AS THE LAST SOURCE, SIMPLY TOUCHING THE LATEST
BLUETOOTH DEVICE TO HAVE BEEN USED WILL WAKE THE WOBURN
UP AUTOMATICALLY. IF YOU WANT TO PLAY ANOTHER BLUETOOTH
DEVICE INSTEAD OF THE LAST ONE USED, PRESS THE WAKE BUTTON
ONCE TO PLAY MUSIC AGAIN.