Marshall Stanmore Handbuch Seite 25

POWERSAVER & STANDARD
001. POWERSAVER STANDBY MODE: THE STANMORE WILL GO TO POWER
SAVING STANDBY MODE AFTER 20 MINUTES OF NOT RECEIVING A
SOUND SIGNAL. IF YOU HAVE CHOSEN TO USE THE POWERSAVER
STANDBY MODE, THE STANMORE WILL NOT WAKE UP AUTOMATI-
CALLY WHEN YOU BEGIN PLAYING MUSIC AND WILL NOT SHOW UP
AS AN AVAILABLE DEVICE IN YOUR BLUETOOTH LIST AFTER IT HAS
GONE INTO THIS LOW-POWER STATE. TO ACTIVATE STANMORE AND
PLAY MUSIC FROM ANY SOURCE AFTER THE UNIT HAS GONE TO
STANDBY MODE, PRESS THE WAKE BUTTON ONCE. THIS WILL BRING
THE STANMORE BACK TO LIFE AND READY TO PLAY AGAIN.
002. STANDARD STANDBY MODE: THE STANMORE WILL GO INTO STANDBY
MODE AFTER 20 MINUTES OF NOT RECEIVING A SOUND SIGNAL.
IF YOU HAVE CHOSEN TO USE THE STANDARD STANDBY MODE, THE
STANMORE WILL AUTOMATICALLY 'WAKE UP' WHEN THE LAST
SOURCE IS PLAYED. FOR EXAMPLE, IF A SOURCE CONNECTED WITH
A CABLE BEGINS TO PLAY, THE SPEAKER WAKES UP AUTOMATICALLY
WHEN THAT SOURCE IS SELECTED. IF A BLUETOOTH DEVICE WAS
USED AS THE LAST SOURCE, SIMPLY TOUCHING THE LATEST
BLUETOOTH DEVICE TO HAVE BEEN USED WILL WAKE THE STANMORE
UP AUTOMATICALLY. IF YOU WANT TO PLAY ANOTHER BLUETOOTH
DEVICE INSTEAD OF THE LAST ONE USED, PRESS THE WAKE BUTTON
ONCE TO PLAY MUSIC AGAIN.