Marshall Stanmore Handbuch Seite 18

LOCATING YOUR DEVICES VIA BLUETOOTH
SELECT BLUETOOTH AS THE INPUT SOURCE BY PRESSING SOURCE/WAKE
ON THE SPEAKER. BLUETOOTH IS NOW ACTIVATED, WITH A FLASHING
RED LIGHT IF NO DEVICE IS CONNECTED, AND A SOLID RED LIGHT IF
A DEVICE IS CONNECTED. STANMORE SPEAKER WILL NOW AUTOMATI-
CALLY SEARCH FOR PAIRED DEVICES FOR 3 MINUTES, AND THE LED WILL
RAPIDLY FLASH RED DURING THE SEARCH. THE STANMORE SPEAKER WILL
LOCATE DEVICES WITHIN RANGE THAT HAVE PREVIOUSLY BEEN CON-
NECTED AND WILL CONNECT THEM AUTOMATICALLY. IF NO DEVICES ARE
LOCATED WITHIN THREE MINUTES, THE STANMORE SPEAKER WILL REVERT
TO STANDBY STATUS (EITHER POWERSAVER MODE OR STANDARD MODE,
DEPENDING ON WHICH OPTION YOU CHOOSE. THERE IS MORE INFORMA-
TION ON MODES IN THE STANDBY MODES SECTION ON PAGE 024.). IF THE
PAIR BUTTON IS PRESSED WHILE BLUETOOTH IS SELECTED AS THE AUDIO
SOURCE, THE STANMORE LOUDSPEAKER WILL PERFORM A NEW SEARCH
FOR THREE MINUTES AFTERWARDS, DURING WHICH TIME, THE LED LIGHT
WILL RAPIDLY FLASH RED.
NOTES:
• THE AUTO CONNECTION FUNCTION WILL NOT WORK IF THE STANMORE LOUD-
SPEAKER IS TURNED OFF VIA THE MAIN POWER SWITCH AT THE TOP OF THE UNIT.
• IF A SEVENTH DEVICE IS CONNECTED, DEVICE A WILL NO LONGER BE MEMORISED.
• ALWAYS START BLUETOOTH IN YOUR SMARTPHONE/COMPUTER FIRST, AND THEN
START STANMORE LOUDSPEAKER TO RECEIVE AN AUTO CONNECTION.
018.