Belt Adjustment - Master F-20 Bedienungsanleitung

EN
If the treadmill belt/deck/roller is kept reasonably clean it is possible to expect over
1200 hours before additional re-lubing is necessary
4.4 How to check the running mat for proper lubrication
1. Disconnect the main power supply.
2. Fold the treadmill up into the storage position.
3. Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry when touched, apply a suitable silicone lubricant
We recommend you use a silicone based spray to lubricate your Lifespan
Treadmill. This Can be purchased from your local sports Retailer or a local
hardware store.

4.5 Belt Adjustment

: Belt Tension Adjustment-It is very important for joggers and runners in order to
provide a smooth, steady running surface. Adjustment must be made from the right
and left rear roller in order to adjust tension with the Hexagonal Wrench provided in
the parts package. The adjustment bolt is located at the end of the rails as noted in
diagram below
Left bolt Right bolt
Note: Adjustment is thru the small hold on the end caps
66