Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
16 Power indicator
Lights up when the unit is powered on.
17 Gain controls
For adjusting the input amplification for channels
1 to 4.
18 Input selectors
For selecting the input source for channels 1 to 4.
20 Power input
Plug in the supplied power cable here.
21 Master output, bal.
Stereo master output (XLR, bal.) for connecting
an amplifier.
22 Master output, unbal.
Stereo
master
output
connecting an amplifier.
23 Output REC
Stereo output (RCA) for connecting an analog
recording
unit.
independent of the position of the master
control.
24 USB ports
USB port (full-duplex, type B), for connecting a
computer.
• Both ports can be used simultaneously as an
input for digital audio signals for playback via
channel 4 and as output of the digital master
signal.
• The digital master level is independent of the
master control.
• The digital master signal is constantly available,
i.e. it is independent of the input selector.
(RCA,
unbal.)
The
recording
level
19 Buttons CUE
Buttons for monitoring the input channels 1 to 4
ahead of the respective channel fader via
headphones connected to the jack PHONES.
With the button pressed, the red LEDs light to
immediately
monitored.
25 Ground terminals
Ground
clamping
connected to channel 1 and channel 2.
26 Inputs PHONO
Stereo inputs PHONO (RCA) for channel 1 and
channel
2
magnetic system.
for
27 Inputs LINE
Stereo inputs LINE (RCA) for channel 1 to 4 for
connecting units with line level outputs (e.g. CD
players).
is
17/20
indicate
that
a
channel
screws
for
for
connecting
turntables
00070193.DOC, Version 1.0
is
turntables
with
Werbung
Inhaltsverzeichnis
