How To Change Or Delete A Programmed Recording (Timer); Nextview Link - Philips DVDR 730/02 ShowView Bedienungsanleitung

Programming a recording (TIMER)
Selecting daily/weekly recordings
In 'Date' use SELECT to select from the following options:
'Mo-Fr': Repeated daily recordings from Monday to Friday
'Mon': Repeated weekly recordings (every week on the same day, e.g.
Monday).
Programme numbers of the 'EXT1' and 'EXT2' scart socket
You can also programme recordings from external sources via scart
socket EXT1 TO TV-I/O ('EXT1') or EXT2 AUX-I/O ('EXT2').
'Switching on 'VPS/PDC' in the 'Start' input field
Select the 'Start' input field using TIMER s . Using
SELECT switch on 'VPS/PDC' ('*' lights up). If you press
SELECT again, you will switch 'VPS/PDC' off ('*' goes out).
Changing the recording quality in input field 'End'
Select the 'End' input field using C .
Use SELECT to select the recording mode.
5 If all information is correct, press the OK button.
P
The programming information is stored in a TIMER block.
6 To end, press TIMER s .
P
The disc you have inserted will be checked.
7 Search the position on the disc where the recording should begin.
8 Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been switched off using the STANDBY m button.
If any of the TIMER blocks are in use, 'TIMER' will light up on the
recorder display.
58
How to change or delete a
programmed recording (TIMER)
Preparation:
•) Switch on the TV set, and if necessary, select the programme
number for the DVD recorder.
•) Switch on the DVD recorder.
1 Press TIMER s on the remote control.
P
The programming mode selected last is marked.
2 Select 'Timer List' using B or A and confirm with C .
Timer
Timer List
Date Prog.
01 BBC1
-- -----
Total record time: 01:15
To change
Press ›
3 Select the programmed recording (TIMER) you want to check,
change or delete with B or A .
Delete programmed recording
- Press the CLEAR button.
- Confirm with OK . 'Timer Cleared' will briefly appear on the TV
screen.
'-- ---' appears rather than the displayed values
4 Press C .
Select the input field with D or C .
If required, change the information with A , B or the number
buttons 0..9 .
5 Confirm with OK .
6 To end, press TIMER s .
7 Switch off with STANDBY m .

'NexTView Link'

This DVD recorder is equipped with the 'NexTView Link' feature. If
your television is also equipped with 'NexTView', you can mark TV
programmes on the television for programming. These TV programmes
will automatically be transmitted to a TIMER block on the DVD
recorder.
If you clear the marking of the TV programme on the television, the
corresponding TIMER block on the DVD recorder will also be cleared.
For more information, read the instruction manual of your TV set.
VPS Rec
Start PDC End Mode
20:15 * 21:30 M2
--:-- --:-- --
To exit
Press TIMER