Herunterladen Inhalt Inhalt Diese Seite drucken

Automatic Recording From A Satellite Receiver (Sat Recording); Direct Record - Philips DVDR 730/02 ShowView Bedienungsanleitung

Pan & scan-konvertierung, letterbox-konvertierung, kindersicherheit, progressive scan
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Manual recording
Automatic recording from a satellite
receiver (Sat recording)
You can use this function if your own a satellite receiver that can
control other devices via a scart cable and a programming function
(timer). For more information, please see the operating instructions for
the satellite receiver.
1 Switch on the TV set. If required, select the programme number
for the DVD recorder.
2 Press SYSTEM MENU on the remote control.
P
The menu bar appears.
3 Select '
' symbol with D or C .
A
4 Select 'Record settings' using B or A and confirm with C .
5 Select 'EXT2' in line 'Sat record' with D or C .
Switching off 'Sat Recording'
To switch off the function, select 'Off' using C or D .
6 Confirm with OK .
7 Use a scart cable to connect scart socket EXT2 AUX-I/O on the
DVD recorder to the corresponding scart socket on the satellite
receiver.
8 To end, press SYSTEM MENU .
9 Insert a disc you want to use for recording.
0 Programme the satellite receiver with the required information
(programme number of the TV channel, start time, finish time).
If necessary, please see the operating instructions for your satellite
receiver.
A Switch off the DVD recorder using STANDBY m .
P
'SAT' also appears in the display to indicate that the function
is active.
The DVD recorder is now ready to record.
P
The start and end of the recording is controlled via scart cable
EXT2 AUX-I/O .
48

Direct Record

Can you record the right TV channel in seconds when the DVD
recorder is switched off? No problem. If recording is started manually,
the switched off DVD recorder takes the current TV channel from
the TV set via the scart cable.
You will find more information on how to switch 'Direct record' on or
off in the next section 'Direct record'.
How does Direct Record work?
The DVD recorder compares the TV channel selected on the TV set with its
stored TV channels via the scart cable. If the same TV channel is found, it
switches the DVD recorder to the corresponding programme number and
starts recording.
Please do not change channel on the TV during the search. This could affect
the tuning of the DVD recorder.
1 On the TV set, select the programme number you want make the
recording from.
2 Press REC/OTR n with the DVD recorder switched off.
P
The display will read 'WAIT'
The DVD recorder is comparing its saved TV channels with
those of the TV set. Please do not change the TV channel on
the TV set while 'WAIT' is shown in the display.
P
'NOTV' appears in the display
This TV channel could not be found in the DVD recorder's
memory.
Check that all TV channels saved on the TV set are available
on the DVD recorder. If required, save any missing channels.
Please read 'Manual TV channel search' in 'Installing your DVD
recorder'.
Check the connectors at both ends of the scart cable.
Check your TV's operating instructions to see which scart
socket is used for video signals.
If the problem persists, you won't be able to use this feature.
3 Stop recording with STOP h .

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dvdr 730/00 showviewDvdr 730/00Dvdr 730/02

Inhaltsverzeichnis