Playback; General Notes On Playback; Inserting A Disc; Playing A Dvd Video Disc - Philips DVDR 730/02 ShowView Bedienungsanleitung

General notes on playback

With this DVD recorder you can play back the following systems:
•) DVD Video
•) (Super)Video CD Disc
•) DVD+RW Disc
•) DVD+R Disc
•) DVD-RW (video mode, finalised)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3-CD
•) Picture -CD (JPEG-data)
You can operate the video recorder using the remote control or the
buttons on the front of the DVD recorder.
a
The display will read 'PIN'
b
The child lock has been activated for the inserted disc. Read the sections
on 'Child lock' and 'Releasing a disc' in the chapter on 'Access control
(child lock).
a
The menu on the screen is showing an 'X'
b
Some DVD discs can be manufactured so that certain steps are required
before the disc can be played, or so that only limited operation is possible
during playback. When an 'X' appears on the screen the selected feature
is not possible.
a
The screen is showing regional code information
b
Since DVD films are not normally released in all parts of the world at the
same time, all DVD players have a specific regional code. Discs can be
given a regional code. If the regional codes differ between the player and
the disc, playback is not possible.
b
The regional code is shown on the label on the back of the machine.
b
The regional code does not apply to recordable DVDs.
a
I can see the message 'EMPTYDISC'
b
The disc does not contain any recordings.
'DISC ERR' will appear on the display
a
b
Recording could not be completed correctly because of a disc error. Check
the disc and clean it if necessary.
a
A dialog box appears asking you whether you want to delete
the contents or eject the disc
b
The disc inserted is a DVD+RW but its contents are not DVD
video-compatible (e.g. a data disc). Recordings on this disc can only be
made if the entire disc is first deleted with the REC/OTR n button.

Inserting a disc

1 Press the OPEN/CLOSE J button on the front.
OPENING
P
The disc tray will open. While the disc tray is opening, the
display shows 'OPENING' and then 'TRAY OPEN' when the tray
is fully open.
2 Carefully place the disc in the tray with the label facing up and
press PLAY G or OPEN/CLOSE J .
P
'CLOSING' and then 'READING' will appear in the display. The
information on the disc will be read.
How do I insert a double-sided DVD?
Double-sided discs do not have labelling over the whole surface. The labelling
for each side is in the centre of the disc. To play a side its label must be
facing up.
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control.
Press and hold the STOP h button on the remote control until the dialog
box shows 'OPENING' or 'CLOSING'.

Playing a DVD video disc

A menu may appear when a DVD is played back. If the titles and
chapters are numbered, press a number button on the remote control.
You can also use the D , C , A , B buttons or number
O
buttons 0..9 to select a menu item and confirm with OK .
O
You can also access the menu using DISC MENU on the
remote control.
1 If playback does not start automatically, press PLAY G .
P
title/chapter number, elapsed time will appear on the display.
C01
2 To stop playback, press STOP h on the remote control or
h on the DVD recorder.
3 To remove the disc, press OPEN/CLOSE J on the front of the
DVD recorder.

Playback

P01
2:04
27