Herunterladen Inhalt Inhalt Diese Seite drucken

Programming Recordings Without The Showview - Philips DVDR 730/02 ShowView Bedienungsanleitung

Pan & scan-konvertierung, letterbox-konvertierung, kindersicherheit, progressive scan
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

a
The following message appears on the screen: 'Please
enter programme number'
b
The programme number of the TV channel has not yet been
assigned to the ShowView number. Use C , D or the number
buttons 0..9 on the remote control to select the appropriate
programme number (name) of the TV channel and confirm with
OK .
a
The following message appears on the screen: 'ShowView
number wrong'
b
The entered ShowView number is incorrect. Repeat the entry or
cancel using the SYSTEM MENU button.
b
Check the time/date (see 'Setting the time & date' in 'Installing your
DVD recorder').
a
The following message appears on the screen: 'Weekend
programming not possible'
b
A daily recording was entered for the wrong day. Daily programming
can only be used for recordings to be made from Monday to Friday.
Timer
ShowView system
Date
Prog.
Start
01
BBC1
20:15
Mo-Fr/Weekly
Press SELECT
P
The decoded data appears after confirmation. You can go back
and change the data. Select the appropriate input field with
C or D . If required, make changes using A , B or the
number buttons 0..9 .
'Switching on 'VPS/PDC' in the 'Start' input field
Select the 'Start' input field using C . Using SELECT switch on
'VPS/PDC' ('*' lights up). If you press SELECT again, you will switch
'VPS/PDC' off ('*' goes out).
Changing the recording mode in input field 'End'
Select the 'End' input field using C .
Use REC MODE to select the recording mode 'M1, M2, M2x, M3,
M4, M6, M8'.
Fit to space Recording
You can select also the recording mode 'FR' .
With these setting the recording mode (bit rate) will be automatically
calculated to use the complete empty space (title 'Empty').
If the empty space is too small the recording will be stopped to prevent
the following titles from being overwritten.
Do not use this function under the following conditions:
•) more then one programmed recording
•) daily/weekly repeated recordings
•) recordings with VPS/PDC
May be the calculation of the recording mode can not function properly.
Programming a recording (TIMER)
VPS
Rec
PDC End
Mode
21:30
M2
To store
Press OK
6 If all information is correct, press the OK button. The
programming information is stored in a TIMER block.
7 To end, press TIMER s .
8 Insert a recordable disc (one without write protection).
The inserted disk is checked.
9 Search the position on the disc where the recording should begin.
Press STOP h .
0 Switch off the DVD recorder using STANDBY m .
The programmed recording functions only if the DVD recorder
has been switched off using STANDBY m .
If one or more recordings have been programmed 'TIMER' will light up
on the display.
Programming recordings without the
®
ShowView
System
Preparation:
•) Switch on the TV set, and if necessary, select the programme
number for the DVD recorder.
•) Switch on the DVD recorder.
1 Press TIMER s on the remote control.
P
The programming method selected last is marked.
Timer
Timer programming
Date
Prog.
01
BBC1
Mo-Fr/Weekly
Press SELECT
2 Select line 'Timer programming' with B or A . and confirm
with the C button.
P
The information will appear on the screen.
3 Select the input field with D or C .
4 Enter information with B or A or with the number buttons
0..9 .
VPS
Rec
Start
PDC End
Mode
20:15
21:30
M1
To store
Press OK
57

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dvdr 730/00 showviewDvdr 730/00Dvdr 730/02

Inhaltsverzeichnis