Troubleshooting; Safety Tips; Faults - Causes And Remedies - Beem B7.001 Bedienungsanleitung

troubleshooting

troubleshooting
EN

safety tips

Faults - causes and remedies

Fault
Display shows
E00.
Display shows
E01.
Display shows
EEE.
Display shows
HHH.
68
DANGER
Electric shock hazard!
► Pull the plug out of the mains socket before starting trouble-
shooting.
WARNING
Danger caused by unqualified repairs!
Unqualified repairs can pose considerable dangers for the user and
serious damage to the appliance.
► Repairs to electrical appliances may only be carried out by the
works after-sales service or by specialists trained by the manu-
facturer.
Possible cause
Appliance is too cold.
Appliance is still too warm
after the last baking pro-
gramme.
Temperature sensor open.
Short-circuit in temperature
sensor.
NOTE
► If you cannot resolve the problem with the steps described
above, please contact after-sales service.
► For problems relating to the baking result, please refer to the
notes in the recipe book supplied.
Remedy
Wait until the appliance
has reached room tem-
perature.
Wait until the appliance
has cooled down.
Call After-sales Service.
Call After-sales Service.
BEEM - Elements of Lifestyle