Troubleshooting; Possible Cause - Beem Topclass 3 in 1 Bedienungsanleitung

Multi-back Topclass 3 in 1
The following table will help you locate and eliminate minor faults:
fault
E00 appears in the display. Appliance is too cold.
E01 appears in the display.
EEE appears in the dis-
play.
HHH appears in the
display.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
► For problems relating to the baking result, please refer to the notes in the recipe
book supplied.
36

Troubleshooting

Possible cause

Appliance is still too warm af-
ter the last baking programme.
Temperature sensor open.
Short-circuit in temperature
sensor.
BEEM - Elements of Lifestyle
Remedy
Wait until the appliance
has reached room tem-
perature.
Wait until the appliance
has cooled down.
call customer service.
call customer service.
EN