Limitation Of Liability; Troubleshooting; Possible Cause - Beem Multi-back Topclass 5 in 1 Bedienungsanleitung

EN
We assume no reliability for damage or
follow-up damage in the case of:
■ failure to observe the instructions in
the user manual,
■ use for other than the intended pur-
pose,
■ improper or unsuitable handling,
■ incorrectly performed repairs,
■ unauthorised modifications,
■ use of non-approved parts or spare
parts,
■ use of unsuitable supplementary or ac-
cessory parts.
The following table will help you locate and eliminate minor faults:
fault
E00 appears in the display. Appliance is too cold.
E01 appears in the display.
EEE appears in the dis-
play.
HHH appears in the
display.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
► For problems relating to the baking result, please refer to the notes in the recipe
book supplied.
BEEM - Elements of Lifestyle
Downloaded from www.Manualslib.com

Limitation of liability

Possible cause

Appliance is still too warm af-
ter the last baking programme.
Temperature sensor open.
Short-circuit in temperature
sensor.
manuals search engine
Multi-back Topclass 5 in 1

Troubleshooting

remedy
Wait until the appliance
has reached room tem-
perature.
Wait until the appliance
has cooled down.
call customer service.
call customer service.
35