AEG Ir 4468 Bt Bedienungsanleitung Seite 19

• Turn on / off (default) the Daylight Saving Time (DST).
With a wireless network connected, GMT (+00:00) time is
a time reference of time setting. Add or deduce the hour
according to your time zone when you set the time.
Alarm
There are three independent alarms – 2 alarms of absolute
time setting (Alarm 1 and Alarm 2) and 1 alarm for relative
time setting (NAP Alarm):
• Press Alarm on the remote control to enter this menu
directly.
The first two alarms are similar to the normal alarm. Turn the
alarm on, then set the time and set it to alarm on every day,
once or every specific day of week. Choose Sound to set
the sound to Beep, Melody, Internet Radio or FM.
NOTE:
The alarm source is from the last listened or preset
internet radio if Alarm Sound is set to Internet Radio. It
can only set one station for both alarms. When it reaches
the alarm time, the unit connects to the internet if the set
network is available. Therefore there may be some delay
from the alarm to the radio play. If no network is con-
nection in one minute, the alarm will change to Melody
automatically.
After Alarm NAP is set, it alarms once in
5/10/20//30/6090/120 minutes depending on which one
you have set.
You may choose Alarm Volume to configure the volume of
the alarms.
When the alarm(s) is / are set, there will be a clock icon at
the top of the display. The clock icon with alarm time will
also clearly display on the standby mode screen.
During alarm, press any key to enter the snooze mode. It
will alarm again in 5 minutes. Press the (STANDBY) key to
stop the alarm.
Timer
• Press on the remote control to setup the timer, then
press OK to confirm.
Language
Select the OSD language: English, German, Spain,
French, Portuguese, Dutch, Italian, Russian, Swedish,
Norwegian, Danish and so on.
Dimmer
Configure the brightness of the display backlight.
If you select Power Saving, you can select the level to
which the display is dimmed down when the radio enters
the standby mode or when the radio gets no key activity for
15 seconds.
The Turn On option keeps the display illumination always. If
you select it you can choose how bright the display shall be.
Display
You may choose to set the display in Color or Mono-
chrome.
Power Management
• Choose the power management timer
(5/15/30 Minutes) to set the duration of the radio to
switch to the standby mode automatically when no
network connection is available.
• Choose Turn Off to ignore the power management
function.
Sleep Timer
Turn off or set the sleep time to
15/30/60/90/120/150/180 Minutes. Once the time is set,
there will be a bed icon with remaining minutes at the top
right corner. The IR 4468 BT will shut down once the time
runs out. Press on the remote control for the shortcut of
this function.
Buffer
Configure the buffer time of the music playback to
2/4/8 Seconds.
Weather
The IR 4468 BT is able to display current weather infor-
mation in the standby mode. Turn on the standby display
and set Temperature Unit (°C or °F) to get the weather
displayed at the standby mode.
When it is turned on, the display will switch between time
and weather while being in standby mode.
Set the actual location for the weather information.
FM Setup
Choose Mode: Set Mono / Stereo audio output.
Choose Threshold: Seek Threshold or Stereo Threshold
(Strong, Default, Weak).
Local Radio Setup
You may Manual Setup (Country / City) your location,
or let the system Auto Detect your current location. The
system detects the location according to the IP address of
your connected network.
Press in the main menu Local Radio option to enter this
local radio list directly.
Playback Setup
19