Specifications - Sony LZ60-B1 Bedienungsanleitung

4. Specifications

Item
I/O signals
Temperature range
Power supply
Accessories
Dimensions
12
Both inputs and outputs are insulated from the internal circuits by photocouplers.
I/O format: B1 ... Output: – common, input: + common
B2 ... Output: + common, input: – common
(36-pin micro ribbon connector)
• BCD data output: 6 digits + polarity
Outputs the data selected by switching the counter board mode. Whether to hold the status
after data output or to output data only when DRQ is input can be selected by the initial settings.
• Data request input (DRQ)
Input signal for extracting BCD data.
• Ready signal (READY)
Output signal indicating that the BCD data has been set.
• Channel select signals (SEL1 to SEL4)
Input signal for selecting which scale unit data is to be output. Select the channel before
inputting DRQ.
• Set input (SET)
When all channels have been specified by the channel selection, if this signal is input after
outputting the data for one channel, the data for the next channel is output.
• Alarm output
Output when an alarm status occurs for the output channel.
Operating: 0 °C to 40 °C (32°F to 104°F), storage: –20 °C to 60 °C (–4°F to 140°F)
DC +5 V (supplied from the LT100)
Instruction manual ................... 1
BCD connector plug ................ 1
Specification
153.5 (6.04")
(160.9 (6.33"))
24.8 (0.98")
15.9
(0.63")
Unit : mm (inch)