Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty And Miscellaneous - AKE PowerCom plus Series Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

frequency range:
automatic driving noise dependent volume control
common mode rejection signal input: >
t
wo-way radio
signal output: floating,
common mode rejection
driving noise dependent m
transmitter control: electronic PTT switch against ground
Integral-PTT over microphone input
driving noise dependent voice control switch
compensation of VOX- response delay > 500 ms (ON TOUR and INNOVA)
control pin input: Stereo 3V / duplex 2V
control pin output: Smartphone remote active low
supply for Bluetooth dongle, etc.: 9 V, < 50 mA
Other
power supply
: 10,8 - 14,4 V, ca. 200 mA, (INNOVA 350 mA)
automatic safety disconnection
accessory switching on control port current limiting

Warranty and miscellaneous

Warranty
On this equipment the manufacturer grant a warranty to the final consumer in the
context of the two-year implied warranty on to German right. Hand the defective
equipment unopen with a detailed error description to your specialist dealer over, or
you send it directly to our service department, with foreign interference expire to each
warranty claim!
Conformity
This product has been manufactured and tested according to the newest
technical requirements. Detailed information regarding the CE-marking
with AKE, D 73230 Kirchheim.
References to the recycling after the electrical appliance law
This equipment complies to the new European ROHS guideline. If it should
not be used any longer, it must not be disposed with regular household
garbage but must be turned in at collecting points for electronic waste
(free of charge for consumers). This would help us with the recycling of
valuable raw materials and at the same time provide a contribution to
environmental protection!
100 Hz - 10 000 Hz
/ mobile phone signal outputs: -45
level adjustable
signal output: 60 dB
odulation control > 1 : 0,17
: U batt < 9,5 V
> 1 : 6
90 dB
dB (0dB=1V/µBar)
: ±10dB
< 0,5 A and
> 90 dBA (depend. on micro)
: 130 mA
31

Werbung

Kapitel

Inhaltsverzeichnis
loading

Verwandte Produkte für AKE PowerCom plus Series

Inhaltsverzeichnis