Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The power connections
The power connections
The power connections
violet
GND
red
red
red
ignition or battery positive pole
ignition or battery positive pole
ignition or battery positive pole
With Bluetooth to helmet and weak battery connect the red wire via a separate
With Bluetooth to helmet and weak battery connect the red wire via a separate
With Bluetooth to helmet and weak battery connect the red wire via a separate
switch and turn on this only after the engine is started!
switch and turn on this only after the engine is started!
switch and turn on this only after the engine is started!
Tip: Some modern motorbikes, the font light and other is switched on only
Tip: Some modern motorbikes, the font light and other is switched on only
Tip: Some modern motorbikes, the font light and other is switched on only
after the engine is started. Then you can supply the red wire with this.
after the engine is started. Then you can supply the red wire with this.
after the engine is started. Then you can supply the red wire with this.
black
black
black
battery negative pole
battery negative pole
battery negative pole
blue
blue
blue
Cable or Bloetooth-to-helmet
Cable or Bloetooth-to-helmet
Cable or Bloetooth-to-helmet
connected to battery minus - when using cable to the helmets
connected to battery minus - when using cable to the helmets
connected to battery minus - when using cable to the helmets
bridge
bridge
bridge
cut through
cut through
cut through
connected to battery plus
connected to battery plus
connected to battery plus
yellow
yellow
yellow
Comfort functions, connect to battery neg. pole or chassis to switch off the
Comfort functions, connect to battery neg. pole or chassis to switch off the
Comfort functions, connect to battery neg. pole or chassis to switch off the
m
m
m
icrophone-switch-voice-monitor
icrophone-switch-voice-monitor
icrophone-switch-voice-monitor
green
green
green
Relay control line, optional (only necessary when using a relay cable set for
Relay control line, optional (only necessary when using a relay cable set for
Relay control line, optional (only necessary when using a relay cable set for
automatic accessory activation
automatic accessory activation
automatic accessory activation
violet
violet
violet
Bluetooth AG int. control line, optional,
Bluetooth AG int. control line, optional,
Bluetooth AG int. control line, optional,
Cable or Bluetooth-to-helmet
Cable or Bluetooth-to-helmet
Cable or Bluetooth-to-helmet
If the blue wire is connected to battery negative pole (black), the system is
If the blue wire is connected to battery negative pole (black), the system is
If the blue wire is connected to battery negative pole (black), the system is
automatically switched-off if no helmet is connected and the monitor for the
automatically switched-off if no helmet is connected and the monitor for the
automatically switched-off if no helmet is connected and the monitor for the
microphone switch is active. This functions are not possible when using Bluetooth-
microphone switch is active. This functions are not possible when using Bluetooth-
microphone switch is active. This functions are not possible when using Bluetooth-
to-the-helmets. To use this feature cut off the blue wire! If other wired helmets are
to-the-helmets. To use this feature cut off the blue wire! If other wired helmets are
to-the-helmets. To use this feature cut off the blue wire! If other wired helmets are
used, the input sensitivity can be adjusted by connecting to battery positive pole.
used, the input sensitivity can be adjusted by connecting to battery positive pole.
used, the input sensitivity can be adjusted by connecting to battery positive pole.
For pairing / operate the Bluetooth-to-helmet connections please read the manual
For pairing / operate the Bluetooth-to-helmet connections please read the manual
For pairing / operate the Bluetooth-to-helmet connections please read the manual
"PB-HC2 and integrated PowerCom Bluetooth Gateway".
"PB-HC2 and integrated PowerCom Bluetooth Gateway".
"PB-HC2 and integrated PowerCom Bluetooth Gateway".
Additional comfort functions
Additional comfort functions
Additional comfort functions
With this connection it is possible to mute the
With this connection it is possible to mute the
With this connection it is possible to mute the
with Bluetooth-to helmet for clear sound and switch off the GPS signal for pillion
with Bluetooth-to helmet for clear sound and switch off the GPS signal for pillion
with Bluetooth-to helmet for clear sound and switch off the GPS signal for pillion
(put it into the background, while talking).
(put it into the background, while talking).
(put it into the background, while talking).
Automatic power-on for additional equipment
Automatic power-on for additional equipment
Automatic power-on for additional equipment
The connection
The connection
The connection
"Relais control line"
"Relais control line"
"Relais control line"
negative pole at the activated system. With a relay cable set additional equipment
negative pole at the activated system. With a relay cable set additional equipment
negative pole at the activated system. With a relay cable set additional equipment
like car radio or two-way radio can be activated automatically (master/slave
like car radio or two-way radio can be activated automatically (master/slave
like car radio or two-way radio can be activated automatically (master/slave
function), for this feature the automatic helmet detection has to be activated
function), for this feature the automatic helmet detection has to be activated
function), for this feature the automatic helmet detection has to be activated
wire connected)
wire connected)
wire connected)
.
.
.
22
22
22
Cut through if using with
Bluetooth to Helmet
blue
(12V)
(12V)
(12V)
- when using Bluetooth to the helmets
- when using Bluetooth to the helmets
- when using Bluetooth to the helmets
- compatibility mode for other headsets
- compatibility mode for other headsets
- compatibility mode for other headsets
and mute the GPS signal for the pillion
and mute the GPS signal for the pillion
and mute the GPS signal for the pillion
)
)
)
m
m
m
(green wire) is connected to the battery
(green wire) is connected to the battery
(green wire) is connected to the battery
Fuse max 1A!
Fuse max 1A!
Fuse max 1A!
Attention, when working at the
Attention, when working at the
Attention, when working at the
battery, always separate the negative
battery, always separate the negative
battery, always separate the negative
conductor first, risk of short circuit!
conductor first, risk of short circuit!
conductor first, risk of short circuit!
connect with GND
connect with GND
connect with GND
for
for
for
icrophone-switch-voice-monitor
icrophone-switch-voice-monitor
icrophone-switch-voice-monitor
+12V
red
green
yellow
GND
black
pairing
pairing
pairing
(blue
(blue
(blue
Werbung
Kapitel
Inhaltsverzeichnis
