Enter Sediment; Microscope; Print - MACHEREY-NAGEL URYXXON 500 Handbuch

Manual URYXXON

9. Enter sediment

The Enter sediment menu only shows urine chemistry results for
which an additional entry of sediment findings is necessary. You
can determine freely, which results need to receive additional
sediment findings as well as the actual sediment parameters
(see Sediment options, chapter 8.4.).
Note: To add sediment parameters, you have to activate the En-
ter sediment function and define sediment parameters first.
Settings
Enter sediment
Memory
Check mode
Press the activity-field
sediment
shows the results of samples that still need additional sediment
findings. You can set the filter for these results under sediment
settings (see Sediment options, chapter 8.4.). Multiple options
for the samples are available.
Enter sediment
Seq.No.: 0001
ID: 5552491
2009.12.11 16:13
* BLD 250 Ery/µl
* UBG 2 mg/dl
* BIL 2 mg/dl
* PRO 500 mg/dl
* NIT POS
* KET 25 mg/dl
* GLU >500 mg/dl
pH 8
SG 1.010
* LEU 500 Leu/µl
Note: The sediment filter only sieves results that were measured
after the filter has been set and activated. Already existing results
will not be filtered afterwards.

9.1. Microscope

To enter sediment findings for the displayed result, press the
activity button . A new screen appears, in which you can
choose from a list of sediment parameters on the left side of the
screen (see Sediment options, chapter 8.4.).
Enter sediment
LEUKOS
RBCs
Select
Choose your desired
scroll-arrows and confirm your selection with the activity-
button . Alternatively, you can directly press the sediment
Select
parameter.
44
500
®
Menu
. A new screen appears which
Enter
1/7
Clear
sediment parameter
As soon as you have chosen one sediment parameter, a list with
the sediment parameter's gradation appears. Press the respec-
tive gradation, which is then inserted in the upper right of the
screen. You can enter more sediment information for the result
in the same way.
To delete sediment parameters you have already chosen, press
the respective parameter from the list on the left side of the
screen. Press the activity-button
parameter from the result's sediment findings.
Press
is processed depending on the settings (printed, sent) and re-
moved from the the enter sediment list. If you leave the menu by
pressing
To get to the next result, use the browse-arrows
bottom right of the screen.

9.2. Print

Press the printer icon to print the result in the display. Thus, you
can print results that already have been printed for a second
time.
with the
Enter sediment
LEUKOS
RBCs
Select Clear
Enter sediment
LEUKOS:
LEUKOS
RBCs
Select Clear
Clear
to confirm and save your changes. The result
, none of your choices will be adopted.
Manual URYXXON ® 500 V 01 / 03.10
neg
+
++
+++
+++
, which will remove the
at the
MN