Parity; Printer; Sediment Options; Enter Sediment - MACHEREY-NAGEL URYXXON 500 Handbuch

8.2.1.3. Parity

You have three choices for the parity (none, even, odd). Press
the respective choice-button to change the parity.

8.3. Printer

The Printer menu allows you to turn the printer on and off. Press
the respective choice-button in the option-field. Press
confirm and save your changes. If you leave the menu by press-
ing , none of your choices will be adopted.
Printer

8.4. Sediment options

In the Sediment options menu, you have the option to enter ad-
ditional sediment parameters for every result. This function ena-
bles you to manage both urine chemistry results and microscopic
findings for individual samples.
Sediment options
Enter
sediment
Off

Filter

Off
Print after
Measurement Sediment
Note: To add sediment information to a sample, go to the main
menu and choose „Enter sediment" (see Enter sediment, chapter
9).

8.4.1. Enter sediment

The option-field
Enter sediment
ter sediment function on or off. To do so, press the respective
choice-button. To edit the available sediment parameter, press
the activity-button
Edit sediment
parameters
rameters, if the choice-button
confirm and save your changes. If you leave the menu by press-
ing , none of your choices will be adopted.

8.4.1.1. Edit sediment parameters

The instrument can store up to 30 different sediment parameters.
To label the sediment parameters, you can use up to 10 char-
acters each. For every parameter, you can define 5 categories
or increments. To label these categories you can use up to 8
characters each.
Manual URYXXON
MN
Printer
Off On
Edit sediment
parameters
On
Edit filter
On
allows you to turn the en-
. You can only edit the sediment pa-
is activated. Press
On
® 500 V 01 / 03.10
The Edit sediment parameters menu consists of 6 edit-buttons,
in which you can enter individual information. In the upper left
corner of the screen you can see the number of the parameter
you are currently editing.
Enter sediment parameters
to
1. Param :
The first edit-button in the centre of the screen is meant to as-
sign a name to the sediment parameter. To enter the parameter's
name, press the empty edit-button. The input-menu
pears and you can enter the parameter. Confirm your entry by
pressing . The new parameter has been adopted.
You can enter up to 5 increments (e.g. 0-5, 6-15, 16-30, ...) or
categories (e.g. small, medium, large, ...) for every parameter
into the edit-buttons on the right side of the screen. Press the
edit-buttons and the input-menu
enter your increments or categories. Confirm your entry by press-
ing . The new category has been adopted.
Edit sediment parameters
1. Param :
To define more parameters, use the browse-arrows
bottom of the screen. The sediment parameters you have cre-
ated in the menu can now be used to enter sediment information
in the Enter sediment menu. (see Enter sediment, chapter 9).
Press to confirm and save your changes. If you leave the
menu by pressing
8.4.2. Filter
If the filter is activated, you can enter specific filter criteria to se-
lect results, for which sediment information have to be entered.
The results are selected to enter sediment findings in the Enter
to
sediment menu (see Enter sediment, chapter 9).
By default, the choice-button
and filter criteria are not installed. To activate the filter and to
define filter criteria, press the choice-button
activity-button
Edit
filter
Manual URYXXON
appears in which you can
abc
LEUKOS
neg
+
++
+++
, none of your choices will be adopted.
is activated in the option field
Off
On
is activated.
500
®
ap-
abc
in the
. The adjacent
39