Maintenance - Ventus W831 Handbuch

activate/deactivate it.
Setting up the Wind Alerts
1. In Wind Mode, press ALARM to select alarm which you wish to configure.
2. Press and hold ALARM until alert and corresponding icon starts flashing in the
display.
3. Set Value for Alert:
Press (
fast advance.
Press ALARM to confirm your selection.
4. Upon completion the display will be returned to the wind alert selection screen.
Disabling when Wind Alert is Activated
To Disable Wind Alert:
Press ALARM to disable the alert.

Maintenance

Changing Batteries
The battery statuses of the sensors are checked every hour. If the low battery
indicators light up, replace the batteries for the corresponding unit immediately.
Changing Batteries for the Main Console Unit
1. To avoid losing data and records, connect the AC/DC adaptor to the main unit
first.
2. Remove the latch at the back and replace all batteries. Do not mix old and new
batteries.
3. Replace the cover.
Changing Batteries for the Remote Sensors
1. Replace the batteries following the setup instructions for the corresponding
sensor.
2. When the batteries are properly installed, the sensor will resume sending
signals to the main console unit.
To enforce a search immediately for all remote signals, press and hold (
the main console unit.
Cleaning
The main console unit and outer casings for the remote sensors can be cleaned
with a damp cloth. Small parts can be cleaned with a cotton tip or pipe-cleaner.
) or ( ) to adjust value. Press and hold either button for
28
) on