Herunterladen Inhalt Inhalt Diese Seite drucken

Environment Protection - Gude MIG 192/6K Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für MIG 192/6K:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Do not use the appliance in immediate surroundings
of easily combustible materials such as wood,
wooden sawdust, "varnishes", solvents, petrol,
petroleum, natural gas, acetylene, propane and
similar inflammable materials. Remove them from
the workplace or protect them against sparks.
A suitable extinguisher needs to be around as a
measure for fire extinguishing.
Do not execute any welding or cutting works on
closed vessels or tubes.
Do not execute any welding or cutting works on
vessels or tubes even when open if they contain or
have contained any materials that could explode or
elicit any dangerous reactions due to heat or
moisture.
WELDER INSTALLATION
The following regulations must be observed at the welder
installation:
The operating staff must have free access to the
operating elements and appliance connectors.
It is not suitable to install the appliance in tight
rooms: Sufficient welder ventilation is very important.
Avoid heavily dusty or dirty rooms where the
equipment could suck in dust or other objects.
The appliance (including cables) must not be an
obstacle in passage or inhibit other persons from
working.
It is necessary to work with the welder on a flat
surface and use suitably secured gas bottle for its
operation only.
Emergency Action
Apply the first aid adequate to the injury and get qualified
medical assistance as quickly as possible. Protect the
injured person from more accidents and calm him/her
down.
For the sake of eventual accident, in accordance with
DIN 13164, a workplace has to be fitted with a first-aid
kit. It is essential to replace any used material in the
first-aid kit immediately after it has been used. If you
seek help, state the following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Marking on appliance
Explanation of symbols
The following symbols are used in these Instructions
and/or on the appliance:
Product safety:
Product is in accordance
with appropriate standards
of the European Community
Prohibitions:
Prohibition, general
(in connection with any other
icon)
No cable pulling
Fire, open light source and no
smoking
Appliance not to be used
when wet
Warning:
Warning/Attention
Warning against danger of
trip
Warning against hot surface
Instructions:
Use protective boots
Use protective clothes
Pull the power plug out before
opening

Environment protection:

Do not throw waste to
environment but dispose it
properly.
Any damaged or liquidated
electric or electronic devices
must be delivered to
appropriate collection centre..
Package:
Protect against humidity
Interseroh-Recycling
Warning against dangerous
electric voltage
Warning against deleterious
gases
Use protective gloves
Use a shield for face
protection
Please read the Operating
Instructions before use
Packing cardboard material
may be delivered to
collecting centres designed
thereto.
This side up

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis