Led Indicators - Yamaha I88X Bedienungsanleitung

LED Indicators

Indicators
ACTIVE
MASTER CLOCK INT
ADAT
mLAN
MONITOR 1/2 (44k)
/Sampling Rate
3/4 (48k)
5/6 (88k)
7/8 (96k)
DIGITAL
PEAK
When you press and hold down the [SELECT] switch for one second or longer, the MONI-
NOTE
TOR/Sampling Rate indicator for the current operating sampling frequency (44k, 48k, 88k, or
96k) flashes red.
Status
Steady blue The i88X is operating normally as an mLAN device.
Off An error has occurred during mLAN operation.
Steady green The i88X is using the INTERNAL sampling frequency of
44.1 kHz.
Steady green The i88X is locking to the wordclock master (ADAT).
Flashing green The i88X is not locking to the wordclock master
(ADAT).
Steady green The i88X is locking to the wordclock master (ADAT).
Flashing green The i88X is not locking to the wordclock master
(ADAT).
Steady red CH 1&2 are selected for monitoring output.
Flashing red The i88X is operating with a sampling frequency of
44.1 kHz.
Steady red CH 3&4 are selected for monitoring output.
Flashing red The i88X is operating with a sampling frequency of
48 kHz.
Steady red CH 5&6 are selected for monitoring output.
Flashing red The i88X is operating with a sampling frequency of
88 kHz.
Steady red CH 7&8 are selected for monitoring output.
Flashing red The i88X is operating with a sampling frequency of
96 kHz.
Steady red DIGITAL is selected for monitoring output.
Steady red The analog input signal has reached the peak level.
Meaning
21