Yamaha I88X Bedienungsanleitung Seite 19

2. Using multiple mLAN devices
Connect the mLAN (IEEE1394) connector on the IEEE1394-compatible computer and the mLAN
(IEEE1394) connector on the 01X Digital Mixing Studio and on the i88X using IEEE1394 cables.
In mLAN Graphic Patchbay (refer to the mLAN Graphic Patchbay Online Manual), route the
audio and MIDI signals between the computer and the i88X and set up the wordclock.
This system enables you to make best use of the 01X Digital Mixing function (up to 28-channel
digital mixing). Using eight A/D inputs on the 01X and eight A/D inputs on the i88X enables you
to transfer 16-channel analog audio data to the 01X. Eight D/A outputs on the i88X are avail-
able, as well as MONITOR OUT (stereo) and STEREO/AUX OUT (stereo) on the 01X. These ana-
log interface and the i88X COAXIAL and OPTICAL DIGITAL STEREO jacks expand analog and
digital input and output on the 01X.
The number of available input and output channels may vary depending on the specific mLAN
NOTE
devices connected. For the best performance, it is recommended that you connect up to four
mLAN devices (including a computer) in a network. If the network contains an mLAN device
that is only compatible with a low transfer rate (200 Mbps (S200)), the number of devices and
channels available for connection will be reduced.
Sampler
01X
Microphones
01X
mLAN OUT
1-16ch
MIXER
mLAN IN
1-18ch
INPUT
1-8
IEEE1394-compatible
computer
IEEE1394 cable
Guitar Bass
Computer
mLAN mLAN
IN/OUT IN/OUT
ADAT recorder
Synthesizer
mLAN mLAN
IN/OUT IN/OUT
1-8ch 9-10ch
INPUT/ DIGITAL
OUTPUT STEREO
IN/OUT
1-8 IN/OUT
ADAT
i88X
MTR
i88X
mLAN IN/OUT
11-18ch
(44.1kHz/48kHz)
11-14ch
(88.2kHz/96kHz)
ADAT
19