General Information - Hilti DX 36 Bedienungsanleitung

ORIGINAL OPERATING INSTRUCTIONS
DX 36 powder-actuated fastening tool
It is essential that the operating instruc-
tions are read before the tool is operated
for the first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions are
with the tool when it is given to other per-
sons.
Contents

1. General information

2. Description
3. Accessories, consumables
4. Technical data
5. Safety instructions
6. Before use
7. Guidelines
8. Operation
9. Care and maintenance
10. Troubleshooting
11. Disposal
12. Manufacturer's warranty - tools
13. EC declaration of conformity
14. Confirmation of CIP testing
15. Health and safety of the operator
1. General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.
Printed: 07.07.2013 | Doc-Nr: PUB / 5069831 / 000 / 00
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation "the
tool" always refers to the DX 36 powder-actuated
fastening tool.
Parts and operating controls 1
@
Casing
;
Piston guide
=
Base plate
%
Page
Fastener guide
&
19
Piston
(
20
Spring clip
)
22
Power regulation wheel
+
23
Catch
§
23
Swivel ring
/
25
Stabilizer (fragmentation guard, only USA)
25
26
28
29
34
34
35
35
35
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
NOTE
Draws attention to an instruction or other useful
information.
en
19