Toshiba RAV-SM562XT-E Installations-Handbuch Seite 11

4
INSTALLATION OF INDOOR UNIT
• How to install the Drain hose.
1. Remove the two screws and the Drain band.
2. Cut a slit for the drain hose hole.
Drain band
Screws
3. Place the Drain hose on the U-shape space and
secure it with the Drain band and two screws.
• Rear side piping with Drain hose. (Recommended
direction)
Ceiling
Rear piping hole ∅80
Ceiling
1. Cut or remove the determined direction slit or cover.
2. Pipes and the Drain hose should be fixed together by
the Drain band with two screws.
Cut
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Slit for drain hose hole
175 mm
or more
140 mm
Wall
8
www.heronhill.co.uk
• Other direction piping.
1. Cut the slit of connecting only upper direction.
Slit for upper piping
Cover for side piping
2. Connect the Flexible pipe (5) to the large pipe
(Gas side).
Big pipe
Cover for rear
upper piping
Drain hose
(5) Flexible pipe
Fax: 01823 665807