Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Fohhn Xperience I Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Xperience I:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8. Specifications

TOP XT-1
Power Rating
Components
Sensitivity
SPL max.
Frequency response
Dispersion H x V (-6 dB)
Impedance
Dimensions (W x H x D)
Weight
Colour
Protective grille
metal grille with acoustic foam
Connectors
Safety
Speaker pole
TOP XT-2
Power Rating
Components
Sensitivity
SPL max.
Frequency response
Dispersion H x V (-6 dB)
Impedance
Dimensions (W x H x D)
Weight
Colour
Protective grille
metal grille with acoustic foam
Connectors
Handles
Speaker pole
SUB XS-1/2 (aktiv)
Amplifier output
Components
SPL max.
Frequency response
Dimensions (W x H x D)
Weight
Colour
Protective grille
metal grille with acoustic foam
Handles
Thread plate for distance piece
This equipment conforms to standards EN 61000-6-1, EN 61000-6-3 and EN 60065
150 W/300 W*
6,5"/1" CD
96 dB
123 dB
65 Hz – 20 kHz
90° x 60°
16 Ohm
19,5 x 38 x 23 cm
7 kg
black, textured paint
2x NL4 Neutrik Speakon
Öse für Sicherungsseil
integral, dia. 36 mm
*Peak, 20 ms
300 W/600 W*
10"/1" CD
99 dB
127 dB
65 Hz – 20 kHz
90° x 40°
8 Ohm
32 x 51 x 29 cm
15 kg
black, textured paint
2x NL4 Neutrik Speakon
2 edge handles
integral, dia. 36 mm
*Peak, 20 ms
2x500 W, 4Ω
1x 12" Langhub
125 dB
38 Hz – 130 Hz
43 x 39 x 44 cm
23 kg
black, textured paint
2 edge handles
M20
25
Digital amplifier (integrated in Sub XS-1/2)
EIA amplifier power Tops
(1 kHz, THD+N < 1%)
Amplification
Input sensitivity
Input impedance
Frequency response
S/N Ratio
Slew Rate
Protective circuit
Power supply
Cooling
Weight
**each 4 Ω from 130 Hz via high-pass 6 dB/Okt.
Controllers
Crossover frequency
Controls
Idicator LEDs
Connectors
Inputs
Outputs
from 130Hz 2x4Ω (stereo) or 1x8Ω (bridge mode)
SUB XSP-2 (passiv)
Power Rating
Impedance
integral crossover
Weight
We reserve the right to alter the specifications without notice.
20 Hz – 20 kHz
Switch-on delay, soft start
impedance- and short-circuit protection,
DC-Protect, temperature monitoring
195 V – 250 V AC 50/60 Hz
Convection cooling
Force cooling, if necessary
Temperature-conrolled fan
1.8kg power supply and amplifier
2 digital signal prozessors
5 independent limiters
selektive 3-band limiting (bass/mid/high)
Bandspezifische Zeitkonstanten
48-bit double precision filter technology
AD/DA 24 bit/48 kHz
130 Hz/1.500 Hz
Sub level volume
mono/stereo switch
ground/lift switch
Power on/off switch
2x Signal/Clip LED
2x run/protect LED
bridge mode on LED
2x XLR/jacks, multifunctional input jacks
2x XLR Link jacks
2x NL4 Neutrik Speakon for Top Speaker
Powercon mains jack
Lo-Pass 130Hz / 12dB 7 Oct.
2x 500 W**
32 dB
0 dB V
10 kOhm
>105 dBA
50 V/ms
500 W
4Ω
22 kg

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Xperience ii

Inhaltsverzeichnis