Muting The Beep Tone; Maintenance; Fuse Replacement - Sony XR-6600RDS Bedienungsanleitung

Muting the Beep Tone

BL.
Press the 6 button while pressing
SKIP
the button.
SEL
To reobtain the beep tone, press these buttons
again.
Actual total number:

Maintenance

Fuse Replacement

When replacing the fuse, be sure to use one
matching the amperage rating stated on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case, consult
your nearest Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach and clean with a cotton
swab which was dipped in alcohol. Do not
apply too much force. Otherwise, the
connector may be damaged.
Main unit
Back of the front panel
E
Sony XR-6600RDS ( ,F,G,I) 3-856-008-11 (1)
Fuse (15 A)
EN
13