After Vacuuming - Fakir S350 Bedienungsanleitung

GB

After vacuuming

23
25
44
Operation
Carry out the following steps as soon as you stop vacuu-
ming. Never leave the device unattended.
● Switch off the device using sensor field [25].
> The small MIN-LED in the display [23] flashes
= Stand-by stage
● Pull the plug from the power outlet.
● Cable winder with automatic return system
Pull briefly on the cable - it is automatically pulled in and
rolled up. Guide the cable in this case by hand, until the
cable is completely pulled in and the plug is in its position.
● Ergonomically shaped carrying handle [C] for secure car-
C
rying (transport) of the device with complete accessories,
such as suction hose, telescopic filling tube and nozzle.
● For this, insert the stowage holder [29] of the floor suction
nozzle into the nozzle holder bracket on the underside of
29
the device.
● Place the vacuum cleaner for safekeeping at a location
inaccessible to children.
Do not place the device near heat sources and avoid direct
solar radiation. Heat can damage the vacuum cleaner.
WARNING!
ATTENTION!