Technical Data; General Technical Data - Waeco PerfectCharge MCA1215 Handbuch

Technical data

14 Technical data

General technical data

Battery types
Heat dissipation
Charge mode
Maximum ambient temperature
Storage temperature
Air humidity
Temperature coefficient
Temperature compensation (MCA 12xx)
Temperature compensation (MCA 24xx)
Vibration
Voltage insulation
Insulation resistance
Alarm signal
Communication
Sleep mode (noise-reduced mode)
Remote control (accessory)
Testing/certification
62
MCA1215 – MCA2440
MCA12xx, MCA24xx
Lead-acid, gel, AGM, Li-Ion
Fan
5-level
–20 °C – +50 °C
–40 °C – +85 °C
20 – 90 %
± 0.03 %/°C (0 – 50 °C)
–20 mV/°C (battery sensor)
–40 mV/°C (battery sensor)
10 – 500 Hz
2 g for 10 min/cycle within 60 minutes for X, Y
and Z axis
I/P – O/P: 4 kVw
I/P – FG: 1.7 kVw
O/P – FG: 0.7 kVw
I/P – O/P: 100 MΩ/500 Vg
via relay contact
via LIN-BUS
via remote control (accessory) or DIP switch
On/off switch, three-colour LED, sleep mode
option
In compliance with the EMC directive
2004/108/EC including 2009/19/EC and the
Low-voltage Directive 2006/95/EC
EN 60335-1
EN 60335-2-29
EN 55022
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2, 3, 4, 5, 6, 8, 11
ENV 50204
EN