BEAUTY ANGEL CT 28 Gebrauchsanweisung Seite 83

Cleaning and maintenance
34
– Remove the screw.
– Fold down the clamping strip.
– Use the suction cup to pull out the panel from the guide.
– Remove the panel to the side and carefully lay it aside.
– Remove the screws and then remove the lamp cover.
Replacing the lamps: see page 32.
The assembly is the same process in reverse order.
When assembling please note:
– Insert the holding bar at the bottom with the hexagon in the recess of the
holding device and align.
DANGER!
Danger of crushing fingers when folding the clamping
strip!
Fingers can be crushed when folding the clamping strip.
– Do not hold fingers between the clamping strip and
acrylic glass panel when folding.